9 Tips to make More Durable car tires

Here are tips to be more durable tires.
1. Check the pressure banBiasakan to check tire pressure at least once per month and before a long trip.

Flat tire can cause excess heat which can damage the tires so the tires fail to function properly.

2. Know the optimal tire pressure point

The correct tire pressure can be found on a sticker on the driver's door, or in the manual.

Not based on the numbers listed on the tire side, because it is the maximum pressure for the tires.

3. Check the tires when cold

To ensure accurate measurement, check the tire pressure when cold. Wait at least three hours after driving.

4. Rawat spare tire

Check your spare tire each month and make sure the pressure is sufficient (not flat). Spare tire is in good condition will be ready for use when needed.

5. Check the tire tread

Bald tires should not be used because it can be dangerous. Check your tire tread regularly, or follow the instructions in the manual.

6. Carefully broken road

Wherever possible avoid damaged roads. Holes in the road not only can damage the tire but also as a car.

7. rotate tires

Be sure to rotate the tires every 6,000 miles (9600 km) to equalize the wear rate of the tire. Rotation will also create a longer tire life.

8. Do not lose your balance

It's important to periodically memriksa 'tire balance' your car. Balance is not good will make the tires wear unevenly.

9. Do not overload

Strain on the car can shorten the life of the tire

Labels:

Tips For Easy Cleaning Car injector

 Does your car engine is turned on it is often difficult or wasteful fuel consumption more than usual, and the voice becomes harsh? If so, you must be careful, because all the symptoms were a sign of auto injector device having problems.
Injector is an important tool that serves to spraying fuel into the engine combustion chamber.
Problems may occur because the device is not able to send pulses to the sensor Electronic Control Unit (ECU) in accordance with proper dosing.
In fact, one of ECU function is to regulate the pressure and the frequency of bursts of fuel into the engine combustion chamber based on the received pulse sensor.
To obtain maximum results, spray the fuel and air in the combustion chamber to be precise. If not correct, then the injector having problems.
So what are the problems that often occur in the injector? How do I fix it?
Follow these tips:
A. Bursts of Weak Fuel
Injector needle is clogged dirt will cause no strong bursts of fuel from the injector into the combustion chamber.
Small particles that clog the needle can be derived from the less clean fuels.
Impurities can also be derived from the fuel tank in the car suffered corrosion.
The particle size was small, about 10-30 microns so that the fuel filter is sometimes not able to filter it.
Although its size is very small, but quite disturbing performance of the injector, especially if the dirt is growing from time to time.
2. The injector leak
Leakage occurs when the injector needle can not close tightly after spraying fuel.
As a result, still dripping fuel in the combustion chamber. So that the spark plug becomes wet and inaccurate calculation of Lambda, which ultimately makes it difficult ignited engines.
One thing to note, spray fuel into the engine combustion chamber by the injector is tangible fog.
3. Way Mangatasi Problem
There are two ways you can do to solve this problem, namely:
a. Round Accelerate Machine
You can do it yourself because it is very simple. The trick is as follows:
- Turn on the ignition. After that, stepped on the gas pedal in up to a maximum point.- Make up to four to five times, and each time step on the gas pedal should be held approximately 1-2 minutes.
At high engine speed (about 5,000 rpm), then a strong blast of gasoline as well. At that moment, impurities in the combustion chamber and the valve will be pushed out.
But, if this does not work, you can try the following manner, namely by using a cleaning fluid.
b. Use liquid cleaners
There are two ways to do the injector cleaning. You can simply clean it in the car, or you remove the injector and the use of ultrasound.
Method 1:Fill the tank with a cleaner (injector cleaner) to remove water, sulfur, or fungi that may be in the injector. This cleaning fluid you can buy at auto parts stores.
Method 2:Remove the injector, then tested with a special ultrasonic tool. The tool serves to determine the fuel flow, fuel spray pattern, and presence or absence of leakage at the injector needle.Once you know the test results, then do the cleaning process.

Labels:

Simple inspection Not Often Go To Car Repair

These are simple checks that can be done to maintain and extend the life of your car.

This examination will also ensure the operation safer and friendlier to the environment.

A. Although the car is under warranty, you are not required to return to the dealer for scheduled maintenance.

You can choose a trusted repair shops with lower prices without voiding the warranty.

2. Oil and filter should be replaced as it appears in a manual vehicle.

Referring to the practical guidance, oil and filter should be changed every 4,000 miles (6400 km) when using a conventional engine oil every 6,000 miles (9,600 km) when using synthetic engine oil.

3. Make sure all the oil checked, including brake oil, power steering, and transmission. All the 'fluid' is playing an important role in the safety and vehicle performance.

4. Check your tires once a month. A flat tire can cause reduced fuel economy and shorten tire life.

5. Make sure the machine is always in tune up. Dirty spark plugs can reduce fuel efficiency by 30 percent.

6. Chassis must be frequently lubricated. The move will extend the life of moving parts of vehicle suspension system.

7. Make sure the batteries, cables and other electrical components are free from dirt and rust.

8. Check the lighting system including headlights, turn signal, brake lights and rear lights.

9. Check the wiper blades if there are cracks or other damage. Replace windshield wipers at least once a year or sooner if it had begun to scratch the windscreen.

10. Check the timing belt and engine hoses. Check if there is damage or missing parts and worn.

11. Check the air filtration system. The air filter should be checked approximately every other oil change to clean dirt and blockage.

12. Inspect and replace the cabin air filter regularly. Cabin air filter to filter the air entering the car that determines the quality of the air you breathe. []

Labels:

Your Auto Warranty: What To Look For

When deciding which car to buy, make sure you check the auto warranty that comes with the vehicle. In this article we will help you sort through all the auto warranty-related issues. After all, not every new car warranty is created equally. Some will cover all the non-wear items on the car up to only three years or 36,000 miles. Others will cover repairs all the way up to 10 years or 100,000 miles. The strength of the coverage that is included will help you decide whether to buy an extended auto warranty.

It's important to understand the different parts of an auto warranty as it is good to know the difference between a new car warranty and an extended auto warranty.

A typical new car warranty has two parts: the "bumper to bumper" warranty, which covers everything except the "wear" items such as brakes and tires; and the power-train warranty that covers all the parts that make the car move, such as the engine and transmission.

Bumper to Bumper

Few extended vehicle warranty plans cover absolutely everything on a vehicle. Read the warranty contract and find out exactly what is and what is not covered. If the contract says it covers everything except for X, Y, and Z; that's a lot more coverage than a contract which lists 10 or 20 items which are covered. Keep in mind your own history with vehicles and what repair/maintenance you expect to have in the next few years to your car.

Wear and Tear

Many extended vehicle warranty plans cover parts that break, just as they cover those that wear out. Once again, read the contract to understand the differences and how they may affect your final cost.

An extended auto warranty can be purchased to prolong the coverage of the bumper-to-bumper warranty. Most people are familiar with the extended warranty that is sold at dealerships. This is sometimes called a "factory warranty" because factory-trained technicians perform the required work on the car. There are also "third-party" warranties, which can save consumers money but are generally less convenient to use. Many third-party warranties require out-of-pocket payment for repairs before reimbursement. Weigh all these factors carefully before you make your choice.

By looking carefully at your auto warranty before you buy, you will save yourself much potential future problems.

Labels: